VetteSource
VetteSource
  • Видео 393
  • Просмотров 1 975 498
The Yukon XL 2500 is Ready For its New 8.1L 496 Marine Crate Engine
In todays video, I'll outline the prep work that's been completed on the 2004 Yukon XL 2500 so the new 8.1 Marine crate engine can be dropped in place of the broken 8.1
Watch as I outline the steps taken so far to prep the engine bay for the new engine and highlight some of the features unique to the 8.1 2500 series Yukons and Suburbans.
To see how the original 8.1L engine in this truck was damaged -
ruclips.net/video/7sxUgYgC1IM/видео.html
To see the video of the new 8.1 Marine engine that is being installed in this truck -
ruclips.net/video/VVPo0p6tj5I/видео.html
To see the rest of my 8.1 truck videos -
ruclips.net/p/PLAM-V1w3acpi6dLnuP0rUYM_4v0ljbfL2&si=D86VsJ5F0Oi3qroJ
#gmt-800 #8100vortec #4...
Просмотров: 571

Видео

Replacing the Abandoned 40th Anniversry Corvette Speedometer Assembly
Просмотров 6672 месяца назад
In todays video, we will continue working on the Abandoned 40th Anniversary Corvette, showing the steps required to remove and replace the speedometer cluster assembly. Watch as I remove the seat, lower kick panel, dash support, and move the steering column out of the way so we can get ro the speedometer.
C4 Corvette Interior Plastic Trim Panel Replacement
Просмотров 1,8 тыс.4 месяца назад
To see more videos of the 1996 Aqua Metallic LT4 Coupe in the @VetteSource fleet - ruclips.net/p/PLAM-V1w3acph-pW75U_YBXKD3VfmfkuFf In today's video, I'll be giving a brief description and overview of the C4 Corvette interior plastics and show just how many of the panels are now plastic versus the earlier year cars. I will also illustrate the proper removal and replacement of the header trim pa...
1996 C4 Corvette LT4 Door Panel Removal in 20 Minutes
Просмотров 1,7 тыс.5 месяцев назад
In todays video, I'll be illustrating how to remove the door panels from the 1996 Aqua Metallic LT4 Coupe in the @VetteSource fleet - ruclips.net/p/PLAM-V1w3acph-pW75U_YBXKD3VfmfkuFf I will give a brief description of the door panels, highlight the location of the mounting screws, and show how to properly remove the door panels without damaging them. I will also point out where the door panels ...
Repairing the C4 Corvette Floppy Ear Hatch Weatherstripping Problem
Просмотров 9207 месяцев назад
In today's video, I'll be working with the rear hatch weatherstripping on the low mileage 1996 Competition Yellow LT4 here in the @VetteSource fleet. I will show how the weatherstripping is made and attached to the body of the car, and perform a temporary repair that can be performed once it starts coming apart in the corners and allowing water to leak into the car. Thanks for watching👍 To see ...
Using the GMT-400 Chevy 454 Dually to Pull an Abandoned Car Out of Its Grave
Просмотров 7619 месяцев назад
In today's video, I'll be testing the pulling power of the 1999 Chevy K3500 CCSB dually to see if we can coax an abandoned Lincoln Mark VII out its 12 year grave. Watch as I perform a brief walkaround and description of this particular car and highlight what might still be useable after all these years sitting in the dirt. My YT channel - ruclips.net/user/vettesource To see more Maintaining Vin...
Whats Next For The Abandoned 1993 40th Anniversary Corvette Now That It Runs (Sorta)
Просмотров 1,5 тыс.10 месяцев назад
In todays video, we'll be talking about what's left to take care of on the low mileage 1993 Abandoned 40th Anniversay Corvette Project Car now that it is in running condition afer many years of improper storage. Watch as I point out the specific items that will need repair, and the decision making process that goes into prioritizing which maintenance items to address first. Thanks for watching👍...
How to Fix the Awful GMT-400 Dual Terminal Battery Cable
Просмотров 1,8 тыс.11 месяцев назад
Today, we're going off topic while I perform a repair on the perplexing dual terminal battery battery cable setup GM decided to install on the late GMT-400 trucks. These battery cables are notorious for backing off the battery post and losing connectivity, sometimes even while driving. Watch as I perform a workaround to eliminate the original factory setup in order to make a more secure connect...
Prepping the Project 1966 Toronado Engine to Bring it Out of Hibernation
Просмотров 562Год назад
In today's video, I'll be taking the initial steps to verify that the 425 Big Block Engine in the 1966 Toronado project car will turn over by hand. Watch as I use Marvel Mystery Oil, a syringe, and a breaker bar to see how things look after the car has been sitting for many years. My YT channel - ruclips.net/user/vettesource To see more videos about this 1966 Toronado - ruclips.net/p/PLAM-V1w3a...
Draining the Abandoned 1993 40th Anniversary Corvette Fuel System
Просмотров 2,7 тыс.Год назад
In todays video, we're going to follow up from last time, in which I succeeded in getting the Abandoned 40th Anniversary Corvette to run temporarily on its own again. Of course, the car had very old fuel contaminated with water, so I'm going to illustrate how to properly drain the fuel tank and fuel delivery lines so we can get it ready for its maiden voyage through the neighborhood. Thanks for...
What Makes This Black 1966 Toronado So Special?
Просмотров 2,1 тыс.Год назад
This factory Black/Black 1966 Toronado has some great unusual factory options, as well as benefitting from being properly stored for many years. Watch as I perform a basic walk-around detailing the cars overall condition while highlighting the options that make this car unique. My YT channel - ruclips.net/user/vettesource To see more Maintaining Vintage Daily Driver Videos - ruclips.net/p/PLAM-...
Road Trip to Oklahoma to Purchase a Very Cool 1960's Oldsmobile Touring Sedan
Просмотров 386Год назад
Road Trip to Oklahoma to Purchase a Very Cool 1960's Oldsmobile Touring Sedan
Using the Foxwell NT301 to Diagnose the 8100 496 8.1L Chevy GMT-800 Pickup
Просмотров 489Год назад
Using the Foxwell NT301 to Diagnose the 8100 496 8.1L Chevy GMT-800 Pickup
Diagnosing the Abandoned 1993 40th Anniversary Corvette Leaking Fuel Injectors
Просмотров 3,8 тыс.Год назад
Diagnosing the Abandoned 1993 40th Anniversary Corvette Leaking Fuel Injectors
C3 Corvette Door Disassembly in 30 Minutes
Просмотров 4,7 тыс.Год назад
C3 Corvette Door Disassembly in 30 Minutes
GMT400 Auxito LED Bulb Headlight Replacement Upgrade
Просмотров 694Год назад
GMT400 Auxito LED Bulb Headlight Replacement Upgrade
Diagnosing the Abandoned 1993 40th Anniversary Corvette Fuel System
Просмотров 2,5 тыс.Год назад
Diagnosing the Abandoned 1993 40th Anniversary Corvette Fuel System
Saving an Abandoned 1990 Oldsmobile Toronado Trofeo
Просмотров 1,4 тыс.Год назад
Saving an Abandoned 1990 Oldsmobile Toronado Trofeo
The Abandoned 40th Anniversary Corvette Gives Us A Great Christmas Present
Просмотров 5 тыс.Год назад
The Abandoned 40th Anniversary Corvette Gives Us A Great Christmas Present
Abandoned Corvettes Are More Common Than You Think
Просмотров 61 тыс.Год назад
Abandoned Corvettes Are More Common Than You Think
Installing the Vortec 8100 496 8.1L Engine Timing Chain Gear Set
Просмотров 3 тыс.Год назад
Installing the Vortec 8100 496 8.1L Engine Timing Chain Gear Set
C3 Corvette Rear Differential Removal in 10 Minutes
Просмотров 8 тыс.Год назад
C3 Corvette Rear Differential Removal in 10 Minutes
C3 Corvette Trailing Arm Removal in 20 Minutes
Просмотров 12 тыс.Год назад
C3 Corvette Trailing Arm Removal in 20 Minutes
Chasing Down C4 Corvette Interior Water Leaks
Просмотров 4,3 тыс.Год назад
Chasing Down C4 Corvette Interior Water Leaks
The Unique C3 Corvette Power Steering System
Просмотров 7 тыс.Год назад
The Unique C3 Corvette Power Steering System
C3 Corvette Body To Frame Mount Bolt Removal in 20 Minutes
Просмотров 15 тыс.Год назад
C3 Corvette Body To Frame Mount Bolt Removal in 20 Minutes
C3 Corvette Door Removal in 10 Minutes
Просмотров 5 тыс.Год назад
C3 Corvette Door Removal in 10 Minutes
Turns Out Corvette Engines Make Excellent Boat Motors
Просмотров 587Год назад
Turns Out Corvette Engines Make Excellent Boat Motors
The Abandoned Corvette That Got Eaten By A Tree
Просмотров 1,7 тыс.Год назад
The Abandoned Corvette That Got Eaten By A Tree
C4 Corvette Rear Suspension Differential Assembly Removal in Under 20 Minutes
Просмотров 11 тыс.Год назад
C4 Corvette Rear Suspension Differential Assembly Removal in Under 20 Minutes

Комментарии

  • @jimferrill1790
    @jimferrill1790 11 часов назад

    Solid vid my man!

    • @VetteSource
      @VetteSource 6 часов назад

      Thanks Jim, glad you enjoyed it👍.

  • @JiMiCriKit
    @JiMiCriKit День назад

    I have a 1990 c4 does it have that lil black box.I sse the big one by the battery.

  • @barneythedog977
    @barneythedog977 День назад

    Wasn't sure about needing a new radiator cap, but one is going to be delivered today and I am happy now after your info that I ordered it. I noticed the older one had crap around the spring etc so it has to go!

  • @barneythedog977
    @barneythedog977 День назад

    Awesome video, very well done and great info. Sub!

    • @VetteSource
      @VetteSource 6 часов назад

      Thanks Barney. Appreciate the feedback👍.

  • @jamesbarchetti5569
    @jamesbarchetti5569 2 дня назад

    Do you. Sel. Have. The c4. Or. Is it. Sold

  • @copisetic1104
    @copisetic1104 2 дня назад

    2005 big block with Allison trans has a 6th gear lockout, you can buy a kit to utilize the overdrive gear. The intake manifold is baffled down to a small opening along with a small MAS change and replace these gain nice power and torque

  • @larrybud
    @larrybud 2 дня назад

    It only takes 20 minutes! (* as long as 80% of the other stuff is removed!)

  • @panchosspeedshop8576
    @panchosspeedshop8576 4 дня назад

    What weight engine oil do you run on the LT4? Its interesting your low mileage car runs lower oil pressure than your high mileage car.

  • @alonzahanks1182
    @alonzahanks1182 4 дня назад

    97 camaros got 6 speeds that im sure of And the lt4 box engine lt4 was faster more tork . 185 intakes made more torq and were faster

  • @blackericdenice
    @blackericdenice 5 дней назад

    8:00 People claim a 1987 Ford 300 inline 6 with 260 lbs-ft torque will pull a house off the foundation. They must be talking about a small 1000 sq-ft house.

  • @robertwest3093
    @robertwest3093 6 дней назад

    Dished pistons in a performance car. Sheeeesh. What was GM thinking? I thought that they had learned that quench was a good thing by that time 😅 Love the series.

  • @robertwest3093
    @robertwest3093 6 дней назад

    Best looking factory intake manifold ever 👍🏻 I could care less if it dies at 4500, because it’s making killer torque up to that point. That makes a good 0-60 street car.

  • @brianbiro9094
    @brianbiro9094 8 дней назад

    Thought it had 405hp 🤔👊👍✌️🦅🇺🇸🦼

    • @VetteSource
      @VetteSource 8 дней назад

      That's correct. It was 405 HP in 1993-1995. 1990-1992 was 375 HP👍

  • @johnyaskoveakarpaccio4737
    @johnyaskoveakarpaccio4737 10 дней назад

    AWESOME video!! i have a '94 ALL STOCK/OEM flawless,everything works NO MODS(that's how its staying)in bright aqua metallic with 26,600 orginal miles,manual =) and yes,i too have the "Mobil one" decal/placcard under the hood...i'm diggin that yellow,and always loved the polo green,with most of the colors,esp the bright ones from this time-era, esp if your paint is flawless,wax and detail it you'd be stunned what kind of mind-blowing color-depth todays waxes bring out and create,again esp with the bright colors.i LOVE turning a physical key to any V8 vs todays push button nonsense.

  • @dukeman7595
    @dukeman7595 10 дней назад

    Best channel on youtube for 'how to do it'. Thanks Brian you have helped me a great deal on all aspects of the c-4 corvette.

    • @VetteSource
      @VetteSource 7 дней назад

      Dalton, thanks for the kind words. I'm glad you've found it helpful👍.

  • @marsupia
    @marsupia 11 дней назад

    when i try to pull it down with the button down, it goes down smoothly till half way when it gets considerably harder and i he button wont pop out and the parking brake light won’t go off

    • @marsupia
      @marsupia 11 дней назад

      it makes a rough scratching noise when i try to pull it down with the button as well

  • @wayne3302264
    @wayne3302264 12 дней назад

    Sound like a 'vette knowledgeable person. Wish you lived near me because I have a sick '96 LT4. Just got it back from a shop that had a year and finally threw in the towel. They did get it running but after replacing the ECM, Optispark, and few other things checked it is still showing some codes and on the DIC it is showing check engine, ASR Off, and service ASR. While it will sit and idle I am afraid to drive it that it will konk out on the road.....lol

    • @VetteSource
      @VetteSource 11 дней назад

      Hey Wayne, that's too bad. Sounds like you need to dig around for a shop that has some Corvette specific experience so that they can address some of what may be some wiring issues from your description. What part of the country are you in? I may have some contacts near you.

  • @DGander007
    @DGander007 12 дней назад

    I have two of these in my 2005 37’ Sea Ray. Great engines !

    • @VetteSource
      @VetteSource 11 дней назад

      For sure, I can only imagine the power output of these bad boys on the open water👍

  • @awaals
    @awaals 14 дней назад

    @VetteSource, I have the following fuel system-related issue/question and hope you or someone else may have an answer: From one day to the next, I have a problem fueling up. At our Costco, I could not add more than 0.1 Gallon, and the filler would shut off. Now, I have the same issue at any gas station. I researched (Google, RUclips, Reddit, Corvette forums, etc.) and only found 2 issues that seemed potentially 'my issue'; 1. I replaced the messed up 'fuel neck', and 2. the EPA Vapor Canister Vent Valve, but no change at all. One mechanic suggested that I lower the gas tank and check/replace the fuel entry flap, but I have not seen nor read anything about this even existing, and I don't think I have the means/ability to go about this myself, hence my question here. Thanks a lot in advance for any insights.

    • @VetteSource
      @VetteSource 11 дней назад

      That's a common problem from the GM vehicles of that era and very frustrating. I've experienced the same problem on my Suburban. What you need to do is disconnect the fuel vapor vent tube from the vapor charcoal canister and blow it out with compressed air. It should clear the line and allow the fuel vapors to escape from the tank as you fill it with fuel. Let me know how it turns out👍

  • @zacdavis04
    @zacdavis04 14 дней назад

    I feel a bit better now. Thanks

    • @VetteSource
      @VetteSource 11 дней назад

      No problem, glad to help👍

  • @yamahaguy1732
    @yamahaguy1732 15 дней назад

    The old Camaros had the reverse lock also

    • @VetteSource
      @VetteSource 11 дней назад

      Yep. I believe most of the GM cars with manual from that era had some form of lockout for safety reasons.

  • @twatson6252
    @twatson6252 16 дней назад

    Where in Texas are you located I have a 85 that I am trying to get back on the road and need advice and parts I AM NEAR CENTERVILLE TX.

    • @VetteSource
      @VetteSource 11 дней назад

      I am in Houston. Funny thing I just drove through Centerville on my way to Paris.

  • @almightytwisted935
    @almightytwisted935 16 дней назад

    My parking brake is very stiff ? Is this normal ? Parking brake on dash stays on all the time

    • @VetteSource
      @VetteSource 11 дней назад

      No, it should move freely. Sounds like you may need to pull the seat - ruclips.net/video/V-Rev8Ep_UI/видео.htmlsi=oQlU4dcFjwBrx_lS so you can access the parking brake cover and remove it. Once it's off, you can take a closer look at the mechanism to make sure nothing is broken and lubricate as needed.

    • @almightytwisted935
      @almightytwisted935 11 дней назад

      @@VetteSource can it be the hand brake switch ?

    • @almightytwisted935
      @almightytwisted935 11 дней назад

      Parking brake disengages atleast it feels like it. So maybe the switch ?

  • @biglon74
    @biglon74 17 дней назад

    ruclips.net/video/pXIdvgvy6lM/видео.html

  • @user-um6ex1qs2l
    @user-um6ex1qs2l 17 дней назад

    Bro you have a ton of knowledge, but you seriously need to stay on point. People are clicking on you to get help with an issue, no one cares about the fkn airplane industry,, what a shame when you before ya started yapping showing off your useless knowledge ( as it pertains to the topic).I was actually leaning something, my advice and I'm sure others feel the same,,, stay focused on the topic.

    • @VetteSource
      @VetteSource 16 дней назад

      Your takeaway from me freely sharing my knowledge is that I can't stay on point? Jesus wept, I'd hate to have to work with you, I'll bet you're a peach😁.

  • @kurtisstutzman7056
    @kurtisstutzman7056 17 дней назад

    I'd take any GM big block, especially the 496, over any diesel boat anchor...!!!

    • @VetteSource
      @VetteSource 11 дней назад

      Well, the diesel engine definitely has its place, and the Duramax is an impressive engine. However, for my purposes, I prefer the simplicity of the gas engines.

  • @kurtisstutzman7056
    @kurtisstutzman7056 17 дней назад

    A neighbor of mine just put one in an ASTRO van...! It was already LS swapped and not surprisingly because it's a GM product, it sold right in place of the LS with very minimal changes...! It's probably the fastest ASTRO van in Florida... Thanks for sharing... Keep up your awesomeness...!

    • @VetteSource
      @VetteSource 11 дней назад

      Now that's hilarious. I'll bet he surprises quite a few people at the stoplights with that rig😁.

    • @kurtisstutzman7056
      @kurtisstutzman7056 11 дней назад

      @@VetteSource When it hooks up...

  • @harryskountzos9327
    @harryskountzos9327 18 дней назад

    whats the big arching top piece called (gose from one side of the car to the other). It connects the rear window with the top

    • @VetteSource
      @VetteSource 18 дней назад

      Those are the interior halo panels. It's actually 2 pieces, a left and right, and are fastened together in the middle with 2 screws that you can see when looking straight up from either seat.

    • @harryskountzos9327
      @harryskountzos9327 17 дней назад

      @@VetteSource you are a legend !!!

    • @harryskountzos9327
      @harryskountzos9327 17 дней назад

      @@VetteSource Quick follow up question what's the outside piece called (the outwards facing piece of the interior halo panels), its painted blue. Thanks in advanced

  • @jasonjones2930
    @jasonjones2930 18 дней назад

    Hi, what about the convertible reason. You mentioned you'll come back to the convertible issue on why water is entering through the cabin near the feet area. Is there drain what could be clogged under the hood?

  • @wlc1980
    @wlc1980 20 дней назад

    I have a 1994 convertible with 61,000 miles. My climate controls act up, won’t respond etc. I tore it down a few years ago and sprayed electronic spray on the terminals as suggested by a video, and it did start working normal. Now it’s acting up again. My CD player has never worked and recently I only get sound out of my right side speakers. I don’t see an adjustment for right to left just front to rear. It’s little things like this that make me want to sell the car sometimes. I’m also trying to diagnose a surging idle when cold, improves when it warms up but barely surges. I can’t find a shop where anybody knows more than me to get it diagnosed. No trouble codes pop up. I’m in the Atlanta area if anybody knows a Corvette expert. I’ve owned the car since 1999. The previous owner sold it when the warranty ran out. Thanks

    • @VetteSource
      @VetteSource 11 дней назад

      Hey Tracy, sounds like you are experiencing some of the normal features inherent in owing a 25 year old car. With the Corvettes, it can become even more frustrating since they were pretty technology heavy for the time, and the electronics aren't the easiest to troubleshoot. I would recommend purchasing a factory service manual set off ebay. There is a ton of information inside, and will lead to you to a proper diagnosis most of the time.

    • @wlc1980
      @wlc1980 10 дней назад

      @@VetteSourceyes I have both GM manuals, they were not cheap. They are not the easiest of reads. They jump around a lot section to section. Thanks for your reply.

  • @76629online
    @76629online 20 дней назад

    You got a lot of facts wrong here. GM had a multiport electronic fuel injection system on the 500ci Cadillacs in 1976. I still remember working on them.

    • @VetteSource
      @VetteSource 20 дней назад

      Cool, thanks for setting me straight👍

  • @almightytwisted935
    @almightytwisted935 21 день назад

    Mine is super stiff and won’t go all the way up. ? Any help ?

    • @VetteSource
      @VetteSource 11 дней назад

      Responded to your other comment👍

  • @pbarnes8952
    @pbarnes8952 23 дня назад

    Brain !! I need 4 Tire sensors for my 1996 Corvette LT1...Can you advise me on where are they available for sale ???

    • @VetteSource
      @VetteSource 22 дня назад

      I might have a complete set available. Do you have my contact information?

    • @pbarnes8952
      @pbarnes8952 22 дня назад

      @@VetteSource No !!! But if you could send me your contact number, that would be great.. Thanks

  • @lewiscollins1856
    @lewiscollins1856 23 дня назад

    Great video BUT you are so jerky with the camera and keep moving the brake handle assembly around so fast. Helped some

    • @VetteSource
      @VetteSource 22 дня назад

      Thanks for the feedback, glad to hear it was helpful👍.

  • @DylanHall-es7iw
    @DylanHall-es7iw 25 дней назад

    Just bought a ‘94 manual with 42,000 miles on it. Drove down to a car show today and met a guy with an ‘89 with 190,000 miles, and he says it still runs great. Keeps me optimistic about the future with mine!

    • @VetteSource
      @VetteSource 22 дня назад

      For sure, with regular maintenance, pretty much every car from the late 80s on can make a great daily driver. Enjoy your Corvette👍

  • @sangamonriverrats6769
    @sangamonriverrats6769 25 дней назад

    i got a 97 TA with the lt1 .. when i got the car it ran 220+, i installed a 160 thermostat and wired both fans with relays and fuses so the left fan comes on with the key and the right fan is on a toggle ... the car runs 180 in stop and go traffic and then drops to 160 on the highway ... these motors make better power at a cooler temp than the factory set them up to run

  • @rlivejoy
    @rlivejoy 27 дней назад

    I have a 1993 40th anniversary and I can’t find the fuel pump relay. Any suggestions?

    • @VetteSource
      @VetteSource 26 дней назад

      There are 2 fuel pump relays, one located on each side of the dash under the kick panels. Once you remove the kick panels, you will see several relays attached to a brace bar. The relay on the PS is located closest to the door. The relay on the left is located closest to the console. Let me know if you need anything else👍.

  • @danielb-c9100
    @danielb-c9100 28 дней назад

    PPE firewall insulation

    • @VetteSource
      @VetteSource 28 дней назад

      Thanks for the suggestion, I'll look into it👍

  • @user-pg1br8bf6x
    @user-pg1br8bf6x 28 дней назад

    Good stuff!

    • @VetteSource
      @VetteSource 28 дней назад

      Thanks Richard, glad you enjoyed it👍

  • @brianglover7629
    @brianglover7629 Месяц назад

    I have the 2001, 270,000 and it is still as strong as it ever was , Love the set up of the Trans and motor , Headers and a Big K_N Filter ,

    • @VetteSource
      @VetteSource 28 дней назад

      Yep, I've heard they breathe much easier with those modifications

  • @petemorton8403
    @petemorton8403 Месяц назад

    Should run em at 180°, then heat unburned at 230 in exhaust pipes

  • @scottweatherman3266
    @scottweatherman3266 Месяц назад

    LT4 has different rings, rocker arms and computer profile. The LT 4 is no advantage if it is very old. Mine had 60 k miles worked well. Not a good buy for me. I also had 5 C 4 models. Pass

    • @VetteSource
      @VetteSource 29 дней назад

      Oh well, not everyone has the same experience. Here is a more detailed breakdown of the LT4 engine and what makes it special - ruclips.net/video/DbpiBg4xaaI/видео.htmlsi=7o8eHxw1ernMNuTZ

  • @hog5146
    @hog5146 Месяц назад

    I want to use the frame on something else can I cut the body off the frame

    • @VetteSource
      @VetteSource 29 дней назад

      All Corvettes C4 and up are a unibody construction and not the older traditional body bolted onto frame. What you see in the video is the unibody structure minus the majority of the body panels, which are either bolted or glued onto this structure. The front and rear suspensions are also bolted to this piece and are not a part of it. To see more detail of how it all goes together and comes apart, check out my playlist containing several disassembly videos - ruclips.net/p/PLAM-V1w3acpg_B2sVlXEL7UPOGVwiKmtL&si=gvx1w45sTbS-TrwR

  • @breakinggames6356
    @breakinggames6356 Месяц назад

    That frame looks pretty clean I would put another 8.1 into it from a truck with a bad frame to at least keep it out of the crusher and anyways I am going to be putting a 8.1 from a suburban 2500 that is rusted out in every way bad frame and body but a low mileage engine into my Silverado 4.3 with a high mileage engine but rust free

    • @VetteSource
      @VetteSource 29 дней назад

      Yep, I have another 2001 8.1L that will ve placed into this truck once we begin the restoration process. That sounds like a cool build you have going on with yours as well👍.

    • @breakinggames6356
      @breakinggames6356 29 дней назад

      @@VetteSource the 4l8X trucks use a detuned 8.1 supposedly because the 8.1 will eat the 4l8 series of transmissions I am not buying that since they put those behind the duramax engines so ill most likely remove the torque limiter people have reported supposedly getting 14-15mpg with a 8.1 in a half ton if this holds true then its a good alternative to the LS engine my frame can legally tow 9,000 if it has the 4.8 either way I dont think any of the 1500 ls engines will hold up well towing that especially if your up in the mountains like I am I have a zf6 Duramax but it is temporarily retired due to frame rot but it has such low millage only 97,000 but it towed great but I want to frame swap it because the body is in great shape and well low mileage drive train but either way a 8.1 in a half ton is going to be fun ill own a 496 ss essentially and no one will suspect a thing either way exciting projects I just wish I could find a extended cab 8ft bed frame

    • @VetteSource
      @VetteSource 28 дней назад

      Yep, those 8.1 extended cab/long beds aren't the easiest configuration to find out in the wild. Nice talking with you, and let us know how it's coming👍.

  • @mikes.1882
    @mikes.1882 Месяц назад

    Anybody put one of these in a gen 4 camaro?

    • @VetteSource
      @VetteSource Месяц назад

      The 4th generation F-Bodies have such a deep firewall, I'm not sure if this bad boy would fit in there, but that would be an interesting build for sure.

  • @user-ys2eq3fn6f
    @user-ys2eq3fn6f Месяц назад

    Very good job bro 🎉🎉🎉🎉

  • @marknormaldayclay5388
    @marknormaldayclay5388 Месяц назад

    I have a 2001, 2500 HD 8.1 250,000 miles. Never had any problem except motor mounts. I pull a 3400 lb tri axle trailer with 19,000 excavator. Never overheated. Loves gas stations... great truck.

    • @VetteSource
      @VetteSource 28 дней назад

      Yep, testimonials for these workhorses can be found all over the comments section of 8.1 videos. They get the job done and make the $$ for their owners.

  • @steveh4837
    @steveh4837 Месяц назад

    I’d like to see what the crate 8.1 could do in your wife’s red firebird!

    • @VetteSource
      @VetteSource 28 дней назад

      Now that would be amusing. I'm afraid the torque might tear that poor f-body apart😁.